HP Rack and Power Manager User Guide

Configuration
3. Schedule automatic discoveries by entering the number of days, hours, or minutes that
should elapse between each automatic discovery in the Schedule box.
4. Enter the SNMP Community Strings, separated by commas, that HP Rack and Power
Manager should use to discover CMC devices (
public is the default string). If you have
not changed the default strings on any devices, this step is optional.
NOTE: Community strings are case-sensitive.
5. Specify the IP address range or ranges for HP Rack and Power Manager to use in
discovery by selecting the checkbox in the Use column next to the range you want to use
in the IP Address Ranges table. Only devices and agents within the specified ranges are
discovered.
6. Do one of the following:
— Click Apply to accept the information and schedule future automatic discoveries.
— Click Execute Discovery Now to perform an immediate discovery and schedule
future automatic discoveries.
— Click Undo Changes to reject all changes and keep the Automatic Discovery screen
open.
To edit an IP address range:
1. Click the hyperlink for the IP address range you want to edit in the Description column of
the IP Address Ranges table. The Add/Edit IP Range box appears.
2. Edit the information as necessary.
3. Click Apply to accept the information, click Undo Changes to reject all changes and
keep the Add/Edit IP Range box open, or click Cancel to return to the Automatic
Discovery screen.
HP Rack and Power Manager User Guide 4-3
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:15 PM