HP Rack and Power Manager User Guide

Installation
b. Select option 4 to enter the communications port on the computer to which the UPS
is attached. Select option 1 to save the changes and exit.
c. Run the following command:
crpmld.ncf
The Serial Relay Agent screen appears, indicating that the Serial Relay Agent has
been loaded. If correctly configured, the message “UPS communications established”
appears. This process might take a few moments. If the message does not appear,
check the hardware configuration and rerun SRASETUP.NLM.
2-44 HP Rack and Power Manager User Guide
HP CONFIDENTIAL Codename: Part Number: 311371-002 Last Saved On: 2/3/04 3:12 PM