HP Rack and Power Manager User Guide

Installation
Table 2-6: Complete List of Variables
Variable Function
INSTALLER_UI {should be equal to silent}
Use this variable to indicate the install type.
CHOSEN_INSTALL_SET {agent, SRA,
agentSRA}
Use this variable to select which agent
component to install.
• Use agent to install the System Agent.
• Use SRA to install the Serial Relay Agent.
• Use agentSRA to install both the System
Agent and Serial Relay Agent.
USER_INSTALL_DIR {Divisions in the file
structure between directories should be
indicated with the symbol '$/$'.
Example: C:$/$hprpm}
Use this variable to indicate the path to which
the agent component is to be installed.
USER_INPUT_CERT_PW_1 {password needed
if CHOSEN_INSTALL_SET = agent or
CHOSEN_INSTALL_SET = agentSRA; should
be equal to USER_INPUT_CERT_PW_2}
Use this variable to input the SSL certificate
password that will be generated during the
install.
USER_INPUT_SRA_COM {Communications
Port Number the UPS is connected to, needed if
CHOSEN_INSTALL_SET = SRA or
CHOSEN_INSTALL_SET = agentSRA}
Use this variable to input the COM port number
to which the UPS is connected.
USER_INPUT_RESULTS_START_1 {this
variable is needed to start the services installed;
it should be equal to Start RPM Services?}
Use this variable to start the HP Rack and
Power Manager service.
Example 2-1: Silent System Agent Installation
INSTALLER_UI = silent
CHOSEN_INSTALL_SET = agent
USER_INSTALL_DIR = c:$\$Program Files$\$HPRPM
USER_INPUT_CERT_PW_1 = Admin
USER_INPUT_RESULTS_START_1 = Start RPM Services?
2-18 HP Rack and Power Manager User Guide
HP CONFIDENTIAL Codename: Part Number: 311371-002 Last Saved On: 2/3/04 3:12 PM