HP Rack and Power Manager User Guide

Overview
Configuration G
Figure 1-8 illustrates a server that is not connected to a UPS but is directly connected to the
network. The server has an installed System Agent that receives commands, such as
displaying a pop-up message or shutting down the operating system, from the Management
Server.
NOTE: Installed agents must be associated with the correct server or UPS load segment in HP Rack
and Power Manager. For information on associating agents, refer to “Attached Agents Screen” in
Chapter 5.
Figure 1-8: Configuration G
Item Description
1 HP Rack and Power Management Server*
2 Additional non-power protected servers (each server
requires installation of the System Agent)
3 Non-power protected server (requires installation of the
System Agent)
*A dedicated Management Server is not required.
HP Rack and Power Manager User Guide 1-17
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:10 PM