HP Rack and Power Manager User Guide

A
Alert Messages
HP Rack and Power Manager enables you to execute a command, send an e-mail, send a
broadcast message, and send SNMP traps to specified recipients if a certain alert situation
prevails.
CAUTION: For each device action that you set, you must configure the normal, opposite
response. For example, if you configure the CMC to turn on a fan when the temperature
exceeds normal, you must also configure the CMC to turn off the fan when the temperature
returns to normal.
A list of all message texts is provided in Table A-1.
Table A-1: Alert Messages
Alert Type Event Response Normal, Opposite Response
CMC Aux 1 Alarm Aux 1 Cleared
CMC Aux 2 Alarm Aux 2 Cleared
CMC Connection Lost to Device Device Connected
CMC Device Settings Changed N/A
CMC Failed to Connect to Device Device Connected
CMC Humidity Above Maximum Humidity Normal
CMC Humidity Below Minimum Humidity Normal
CMC Input 1 Closed Input 1 Opened
CMC Input 2 Closed Input 2 Opened
CMC Input 3 Closed Input 3 Opened
CMC Input 4 Closed Input 4 Opened
CMC Lockset 1 Error Lockset 1 Normal
CMC Lockset 1 Failed to Lock Lockset 1 Normal
CMC Lockset 1 Unlocked Lockset 1 Locked
CMC Lockset 2 Error Lockset 2 Normal
CMC Lockset 2 Failed to Lock Lockset 2 Normal
CMC Lockset 2 Unlocked Lockset 2 Locked
continued
HP Rack and Power Manager User Guide A-1
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:18 PM