HP Rack and Power Manager User Guide

Operation
Event Response Overview Screen
The Event Response Overview screen contains a Supported Events table that summarizes the
manner in which alerts are issued for each alarm condition on the UPS.
When a new UPS is installed, enter the event response information for the related alarm
conditions.
•
•
To copy the event response configuration of another UPS, select the UPS you want to
copy in the Copy Event Configuration from: field, and click Copy.
To edit the response of individual events, click the hyperlink for the event response you
want to edit in the Description column. The Event Response screen appears.
The Event Response screen enables you to configure event responses for supported
events. For each event, HP Rack and Power Manager can be configured to send alert
notifications (e-mail and broadcast messages and SNMP traps), run a computer
command, and initiate a device action (shut down a load segment or release a lockset
controlled by the CMC in the same rack as this UPS).
5-32 HP Rack and Power Manager User Guide
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:32 PM