HP Rack and Power Manager User Guide

Configuration
To change the database password:
1. Click Change Password.
The Change Password box appears.
2. Enter the current password in the Old Password field. The default password is admin.
3. Enter the new password in the New Password field. A password can be between 1 and 50
characters in length. The characters can be alphabetic, numeric, or both. Passwords are
case-sensitive.
4. Reenter the new password in the Confirm Password field.
5. Click Apply to accept the information or click Cancel to reject all changes.
Email Server Setup Screen
The Edit Server Setup screen is only displayed for users who have administrator rights. The
Edit Server Properties box on the Email Server Setup screen enables you to set HP Rack and
Power Manager to send alert messages through e-mail.
To configure HP Rack and Power Manager to use the mail server:
1. Enter the IP address of the outgoing SMTP e-mail server.
2. Enter the e-mail address from which e-mail alert messages are sent.
HP Rack and Power Manager User Guide 4-23
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:15 PM