HP Rack and Power Manager User Guide

Configuration
SNMP Traps Tab
The SNMP Traps tab enables you to set up SNMP trap distribution lists for HP Rack and
Power Manager to recognize. You can set up recognized IP addresses to receive alerts when
various alarm conditions occur, using the Event Response screens for CMCs and UPSs.
For additional information on sending traps to HP Systems Insight Manager and HP Insight
Manager 7, refer to Appendix B and Appendix C of this guide.
To set up a recipient list for SNMP traps:
1. Click Add New SNMP Recipient List. The SNMP Recipients box appears.
2. Enter the name of the recipient or group of recipients in the Recipient List field.
3. Enter the name of the each recipient (up to 10 names) in the Name fields.
4. Enter a valid IP address for each named recipient in the IP Address fields.
5. Click Apply to accept the information, click Undo Changes to reject all changes and
keep the SNMP Recipients box open, click Issue Test SNMP Trap to send a test SNMP
trap, or click Cancel to return to the SNMP Traps tab.
To edit a recipient on the SNMP trap list:
1. Click the hyperlink for the recipient you want to edit in the Recipient List column of the
SNMP Traps tab. The SNMP Recipients box appears.
2. Edit the information as necessary.
3. Click Apply to accept the information, click Undo Changes to reject all changes and
keep the SNMP Recipients box open, click Issue Test SNMP Trap to send a test SNMP
trap, or click Cancel to return to the SNMP Traps tab.
HP Rack and Power Manager User Guide 4-19
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:15 PM