HP Rack and Power Manager User Guide

Configuration
Notification Recipients Screen
The Notification Recipients screen is only displayed for users who have administrator rights.
The Notification Recipients screen enables you to set up distribution lists to be used to send
e-mail/paging, broadcast, and SNMP trap alerts.
Email/Paging Tab
The Email/Paging tab enables you to set up e-mail distribution lists for HP Rack and Power
Manager to recognize. You can set up recognized e-mail addresses to receive alerts when
various alarm conditions occur, using the Event Response screens for CMCs and UPSs.
To set up a recipient list for e-mail alerts:
1. Configure HP Rack and Power Manager to send e-mail using the Email Server Setup
screen. Refer to “Email Server Setup Screen” in this chapter. If HP Rack and Power
Manager is already configured to send e-mail, go to step 2.
2. Click Add New Email/Paging Recipient List. The Email/Paging Recipient(s) box
appears.
3. Enter the name of the recipient or group of recipients in the Recipient List field.
4. Enter a valid e-mail address for each recipient (up to 10 addresses) in the Email
Address(es) fields.
5. Click Apply to accept the information, click Undo Changes to reject all changes and
keep the Email/Paging Recipient(s) box open, click Issue Test Email to send a test
e-mail, or click Cancel to return to the Email/Paging tab.
4-16 HP Rack and Power Manager User Guide
HP CONFIDENTIAL Codename: Swordfish Part Number: 311371-002 Last Saved On: 2/3/04 3:15 PM