HP ProLiant XL220a Gen8 v2 Maintenance and Service Guide

Removal and replacement procedures 37
8.
Remove the FBWC capacitor pack holder from the mounting bracket.
To replace the component, reverse the removal procedure.
Drive cage assembly
To remove the component:
1. Back up all server data on the drive.
2. Power down the server (on page 25).
3. Disconnect all peripheral cables from the server.
4. Remove the server (on page 25).
5. Place the server on a flat, level work surface.
6. Remove the PCI riser board assembly ("PCI riser board assembly" on page 31).
7. Disconnect all cables from the drive cage backplane.