HP ProLiant XL220a Gen8 v2 Maintenance and Service Guide

Removal and replacement procedures 30
I/O module riser assembly
To remove the component:
1. Power down the server (on page 25).
2. Remove the I/O module (on page 25).
3. Remove the I/O module FlexibleLOM adapter. A T-10 screwdriver is required for this procedure.
4. Remove the I/O module riser assembly. A T-15 screwdriver is required for this procedure.
To replace the component, reverse the removal procedure.
DIMMs
To remove the component:
1. Power down the server (on page 25).