HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

Removal and replacement procedures 66
2.
Route the FBWC capacitor pack cable along the standard DIMM baffle and connect the cable to the
mezzanine option.
3. Install the access panel ("Access panel" on page 28).
SAS controller using the non-standard (tall) 3-rank DIMM baffle
To replace the component:
1. Remove the non-standard (tall) three-rank DIMM baffle and install the FBWC capacitor pack on the
DIMM baffle. Route the cable on the front of the DIMM baffle.