HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

Removal and replacement procedures 54
4.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly latch.
5. Install the access panel ("Access panel" on page 28).
NVIDIA Quadro 1000M and 3000M mezzanine
cards
IMPORTANT: This procedure is for replacing NVIDIA Quadro 1000M and 3000M graphics
cards only on the workstation blade. The procedure for replacing these particular graphics cards
on the graphics expansion blade is different, and must be performed by HP service personnel
only.
Required tools for this procedure:
• T-10/T-15 Torx screwdriver (provided inside the server)
• HP Insight Diagnostics software