HP ProLiant WS460c Gen8 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

Removal and replacement procedures 51
To replace the component, reverse the removal procedure.
Mezzanine assembly
To remove the component:
1. Power down the workstation blade (on page 26).
2. Remove the workstation blade (on page 28).
3. Remove the access panel ("Access panel" on page 28).
4. Remove the mezzanine assembly from the workstation blade.
To replace the component:
1. Align the mezzanine assembly with the guide pins on the system board, and then install the mezzanine
assembly on the system board.