HP ProLiant WS460c G6 Workstation Blade with WS460c Graphics Expansion Blade Maintenance and Service Guide

Removal and replacement procedures 71
d.
Carefully pull up on the front and right sides of the PCIe card cage to disengage it from the
anchoring pins on the expansion blade enclosure (1), and then lift the PCIe card cage out of the
expansion blade enclosure (2).
8. Disconnect the graphics card retainer (1), and then remove it from the PCIe card cage (2).
9. Remove the graphics card and, if necessary, the slot cover.
10. Connect the cable pigtail, connect the small bracket, and then attach the screws from the small bracket.