HP ProLiant Storage Server with Windows Storage Server 2003 SP1 - Release Notes (378129-401, October 2006)

Quick Restore process
Description
During the Quick Restore process, a warning is displayed about disconnecting any
external storage arrays connected to the SmartArray controller on the storage
server.
Workaround
To avoid any ch
ance of impacting user data, the volumes in the array should be
disconnected
until the Quick Restore process has completed. The Quick Restore
process has se
veral reboots. When the Windows user logon screen is displayed,
the Quick Res
tore process is complete.
Issue:
Quick Restore—ML350 G4p (SATA)
Description
When performing a Quick Restore for the ML350 G4p (SATA version only) storage
server, if there is data on the data drives but no OS logical drives (arrays) (for
example, OS drives needed to be replaced), a prompt is displayed that states to
removethedatadrives.Thedatadrivesmustbephysicallypulledfromthesystem,
then proceed with the Quick Restore.
Workaround Not applicable.
Issue:
Multiple "File Not Found" m essages during the Quic k Restore process
Description
During th
e Quick Restore process of the ML350 G4p, you may see multiple
messages
on the screen stating File Not Found . The Quick Restore process is
trying to remove les that may have been created during the install process.
Workaround
Nonerequired,thisisnormalduringtheQuickRestoreprocessfortheML350G4p.
Issue:
The ML110 G2 Quick Restore fails to complete in Japanese mod e
Description
The Quick Restore process on ML110 G2 systems (Workgroup and Express
editions) do not complete successfully due to known issues in the restore process.
The restore process can restart the storage server continuously, after displaying
the message Processing final stage of ProLiant Storage Server
installation in Japanese. On the Express edition, the Quick Restore process
completes with the data drive partitions not being created correctly.
Worka
round
Run the Quick Restore process in English mode. After completion of the
restore process, the system can be localized to J apanese by running the
C:\hpnas\conv.vbs conversion utility.
Issu
e:
The Q
uick Restore DVD erases all data when logical drives are missing
Description
If the Quick Restore cannot d etect the original primary and secondary OS logical
drives,QuickRestoreerasesalldataonthedrives.Ifthelogicaldrivelayouthas
remained unaltered, the data drive will b e preserved. If the data drive is preserved,
a drive letter must be reassigned to the preserved volume before use. This item
pertains to the DL100/ML110 G1/ML110 G2 (Express OS Edition) Storage
Server products. This entry also applies to the ML110 G2 (Workgroup OS Edition)
model, however, it has only one OS logical drive.
Workaround
Refer to the HP ProLiant Storage Server Administration Guide and the HP ProLiant
StorageServerUserGuide(formerly Installation Guide) for information on backing
up data prior to performing a Quick Restore procedure.
Issue:
Quick Restore does not succeed with incorrect hard drive c abling
Description
Quick Restore does not succeed with incorrect hard drive cabling.
Storage Server with Windows Storage Server 2003 SP1 release notes
37