HP ProLiant SL4545 G7 Server Node Maintenance and Service Guide

Removal and replacement procedures 37
Personality board assembly
To remove the component:
1. Power down the node (on page 21).
2. Remove the node from the chassis ("Remove a node from the chassis" on page 22).
3. Remove the access panel (on page 23).
4. Disconnect all cables connected from the top of the personality board.
5. Remove the screws securing the personality board assembly to the node.
CAUTION: Do not remove the four screws that secure the personality board to the bracket. Only
remove the screws that secure the personality board assembly to the system board.