HP ProLiant SL4545 G7 Server Node Maintenance and Service Guide

Removal and replacement procedures 36
7.
Remove the SFF backplane.
To replace the component, reverse the removal procedure.
Front panel board
To remove the component:
1. Power down the node (on page 21).
2. Remove the node from the chassis ("Remove a node from the chassis" on page 22).
3. Remove the access panel (on page 23).
4. Disconnect all cables from the front panel board.
5. Remove the three screws securing the front panel board to the node.
6. Remove the board.
To replace the component, reverse the removal procedure.