HP ProLiant SL4540 Gen8 Server Node Maintenance and Service Guide
Table Of Contents
- HP ProLiant SL4540 Gen8 Server Node Maintenance and Service Guide
- Abstract
- Notice
- Contents
- Customer self repair
- Illustrated parts catalog
- Removal and replacement procedures
- Troubleshooting
- Diagnostic tools
- Component identification
- Cabling
- Specifications
- Acronyms and abbreviations
- Documentation feedback
- Index
Removal and replacement procedures 38
6.
Disconnect all cables connected to the underside of the personality board assembly.
7. Remove the personality board assembly.
To replace the component, reverse the removal procedure.
SUV interface board
To remove the component:
1. Power down the node (on page 22).
2. Remove the node from the chassis ("Remove a node from the chassis" on page 23).
3. Remove the access panel (on page 24).
4. Remove the two screws securing the board to the node.
5. Disconnect all cables.