HP ProLiant SL250s Gen8 Server User Guide

Operations 25
8.
Connect all peripheral cables to the server.
9. Power up the server (on page 15).
Remove the FlexibleLOM riser cage
1. Power down the server (on page 15).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15).
4. Remove the SFF hot-plug drive cage ("Removing the SFF hot-plug drive cage" on page 22).
5. Remove the front GPU cage (on page 16).
6. Remove the interposer board (on page 18).
7. Remove the front GPU bracket (on page 19).
8. Remove the FlexibleLOM riser cage:
a. Remove the screws securing the FlexibleLOM riser cage.
b. Lift the cage to remove it from the tray.
Install the FlexibleLOM riser cage
1. If necessary, install the FlexibleLOM ("Installing an expansion board" on page 57).