HP ProLiant SL250s Gen8 Server Installation Instructions

Power Manager for any errors which may prevent installed
components from powering up.
Configuring the chassis
For further information on setting up and configuring your system, see
the HP ProLiant s6500 Chassis Quick Setup Instructions and the HP
ProLiant s6500 Chassis Setup and Installation Guide.
Powering on and selecting boot
options
1. Connect the Ethernet cable and press the Power On/Standby
button.
2. During the initial boot:
o To modify the server configuration ROM default settings,
press F9 when prompted from the start up sequence to enter
the RBSU. By default, RBSU runs in the English language.
o If you do not need to modify the server configuration and are
ready to install the system software, press F10 to access
Intelligent Provisioning.
NOTE: If an HP Smart Array controller has been added or
is embedded in the system, the controller defaults to a
RAID configuration based on the size and number of hard
drives installed. For more information on modifying the
controller default settings, see the documentation on the
Documentation CD.
For more information on automatic configuration, see the HP
ROM-Based Setup Utility User Guide on the Documentation CD or the
iLO Management Engine Information Library
(http://www.hp.com/go/ilomgmtengine/docs).
Installing the system software
To install an operating system on a single server using Intelligent
Provisioning:
1. If needed, access Intelligent Provisioning by rebooting the server
and pressing F10.
2. In the application, complete step 1, Set Intelligent Provisioning
preferences.
3. From the Home screen, click Perform Maintenance, and then
click Firmware Update.
4. Ensure the latest drivers are available for installation. Select
Intelligent Provisioning Software from the list of firmware and
click Update. If the check box is not selected, the latest drivers are
already installed.
5. From the Home screen, click Configure and Install.
6. Follow the on-screen prompts to finish the installation.
To update your drivers and system software:
Intelligent Provisioning automatically integrates optimized ProLiant
server support software from the HP SPP. SPP is the installation
package for operating system-specific bundles of ProLiant optimized
drivers, utilities, management agents, and system firmware. For more
information on using SPP, see the HP Service Pack for ProLiant User
Guide on the Documentation CD or the SPP Information Library
(http://www.hp.com/go/spp/documentation).
The Smart Update Firmware DVD ISO image is also available at the
download tab on the HP website
(http://www.hp.com/go/foundation).
Registering the server
To register the server, refer to the HP Registration website
(http://register.hp.com).
For more information
For more detailed setup and configuration information, see the HP
ProLiant SL Servers Solution Overview and the HP ProLiant s6500
Chassis Setup and Installation Guide. For safety information and
regulatory notices, see the relevant chapter of the server user guide on
the HP website (http://www.hp.com).