HP ProLiant t2500 Chassis Setup and Installation Guide

ManualsBrandsHP ManualsServerHP ProLiant SL210t Gen8 Server

Specifications 33

• HP 750 W Common Slot Platinum Plus Hot-plug Power Supply (94% efficiency with intelligent power

discovery support)

• HP 1200 W Common Slot Platinum Plus Hot-plug Power Supply (94% efficiency with intelligent power

discovery support)

• HP 1200W Common Slot 277VAC Hot Plug Power Supply (94% efficiency)

• HP 1200W Common Slot 380VDC Hot Plug Power Supply (94% efficiency)

• HP 1500W Common Slot Platinum Plus Hot-plug Power Supply (94% efficiency)

CAUTION: Do not mix power supplies with different efficiency and wattage in the chassis. Install

only one type of power supply in a single chassis.

IMPORTANT: Before selecting power supplies, HP recommends that you run the HP Power

Advisor to determine the right size power supply for your server configuration. HP Power Advisor

is available as both an online tool, running directly from the HP website, and as a downloadable

tool. Instructions on how to download and use the tool are available on the HP website

(http://www.hp.com/go/hppoweradvisor).

HP 750 W CS Titanium power supply (96% efficiency)

specifications

Specification Value

Input requirements

—

Rated input voltage

200 to 277 V AC

Rated input frequency

50 Hz to 60 Hz

Rated input current

4.0 A at 200 V AC

3.3 A at 277 V AC

Maximum rated input power

803 W at 200 V AC

798 W at 277 V AC

Btus per hour

2739 at 200 V AC

2724 at 277 V AC

Power supply output

—

Rated steady-state power

750 W at 200 V AC to 277 V AC

input

Maximum peak power