HP ProLiant t2500 Chassis Setup and Installation Guide

Specifications 32
Specifications
Environmental specifications
Specification Value
Temperature range*
Operating
10
°
C to 35
°
C (50
°
F to 95
°
F)
Shipping
-40°C to 70°C (-40°F to 158°F)
Maximum wet bulb temperature
28°C (82.4°F)
Relative humidity
(noncondensing)**
Operating
10% to 90%
Nonoperating
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3,048
m (10,000 ft) is applicable. No direct sunlight allowed.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 kPa.
Mechanical specifications
Specifications Value
Dimensions
—
Height
8.76 cm (3.45 in)
Depth
80.12 cm (31.54 in)
Width
44.80 cm (17.64 in)
Weight
—
Four 1U node, 24 SFF drive
model (maximum)
35.52 kg (78.31 lb)
Four 1U node, 8 LFF drive model
(maximum)
34.58 kg (76.24 lb)
Two 2U node, 24 SFF drive
model (maximum)
31.35 kg (69.12 lb)
Two 2U node, 8 LFF drive model
(maximum)
30.48 kg (67.20 lb)
Power supply specifications
Depending on installed options, the node is configured with one of the following power supplies:
• HP 750 W Common Slot Titanium Hot Plug Power Supply (96% efficiency with intelligent power
discovery support)