HP ProLiant SL210t Gen8 Plus Server Maintenance and Service Guide

Removal and replacement procedures 29
Remove the 2U air baffle
To remove the component:
1. Power down the node (on page 22).
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 23).
4. Remove the PCI riser cage (on page 24).
5. Remove the 2U adapter board bracket (on page 26).
6. Disconnect and remove the Mini-SAS cable ("Remove the Mini-SAS cable" on page 26).
7. Remove the 2U air baffle.
PCI riser board
To remove the component:
CAUTION: To prevent damage to the server or expansion boards, power down the server and
remove all AC power cords before removing or installing the PCI riser board assembly.
1. Power down the node (on page 22).
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 23).
4. Remove the PCI riser cage (on page 24).
5. Remove the PCI riser board from the riser cage.