HP ProLiant SL210t Gen8 Plus Server Maintenance and Service Guide

Removal and replacement procedures 28
2.
Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 23).
4. Remove the 1U cable guard:
a. Press the release latches on each side of the cable guard.
b. Lift the cable guard out of the node.
Remove the 1U air baffle
1. Power down the node (on page 22).
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 23).
4. Remove the 1U cable guard (on page 27).
5. Remove the 1U air baffle.