HP ProLiant SL210t Gen8 Plus Server Maintenance and Service Guide

Removal and replacement procedures 27
3.
Remove the node from the chassis (on page 23).
4. In a 1U node configuration:
a. Remove the cable guard ("Remove the 1U cable guard" on page 27).
b. Remove the 1U air baffle (on page 28).
c. Disconnect and remove the Mini-SAS cable.
5. In a 2U node configuration:
a. If a GPU is installed, disconnect the 2U adapter cable from the GPU power cable.
b. Remove the 2U adapter board bracket (on page 26).
c. Disconnect and remove the Mini-SAS cable.
Remove the 1U cable guard
1. Power down the node (on page 22).