HP ProLiant SL210t Gen8 Plus Server Maintenance and Service Guide

Removal and replacement procedures 26
e.
Lift the PCI riser cage out of the node.
Remove the 2U adapter board bracket
1. Power down the node (on page 22).
2. Disconnect all peripheral cables from the node.
3. Remove the node from the chassis (on page 23).
4. If a GPU is installed, disconnect the 2U adapter cable from the GPU power cable.
5. Remove the 2U adapter board bracket.
Remove the Mini-SAS cable
1. Power down the node (on page 22).
2. Disconnect all peripheral cables from the node.