HP ProLiant SL170z G6 Server Maintenance and Service Guide

Contents 46
To remove the PCIe bracket:
1. Remove one screw which secures PCIe bracket to the rear panel.
2. Pull the PCIe bracket up and away from the main board.
Figure 24 Removing the PCIe bracket
To remove the riser card:
Remove the two screws securing the riser card to the PCIe bracket.
Figure 25 Removing the PCIe x16 riser card
To install the PCIe x16 riser card on the bracket:
1. Align the riser card with the bracket.
2. Fasten the two screws to secure the riser card to the bracket.