HP ProLiant SL170z G6 Server Maintenance and Service Guide

Contents 43
• Supported configurations:
○ One DIMM per processor: 8A for CPU1; 8A for CPU2.
○ Three DIMMs per processor: 8A, 5B, 2C for CPU1; 8A, 5B, 2C for processor 2.
○ Six DIMMs per processor: 8A, 7D, 5B, 4E, 2C, 1F for CPU1; 8A, 7D, 5B, 4E, 2C, 1F for
processor 2
○ DIMM population order processor socket 1: 8A, 5B, 2C, 7D, 4E, 1F, 6G, 3H.
○ DIMM population order processor socket 2: 8A, 5B, 2C, 7D, 4E, 1F, 6G, 3H.
Figure 19 Population order of DIMM slots
• J10 – processor 2 DDR3 DIMM 8A Slot
• J11 – processor 2 DDR3 DIMM 7D Slot
• J12 – processor 2 DDR3 DIMM 6G Slot
• J13 – processor 2 DDR3 DIMM 5B Slot
• J14 – processor 2 DDR3 DIMM 4E Slot
• J15 – processor 2 DDR3 DIMM 3H Slot
• J16 – processor 2 DDR3 DIMM 2C Slot
• J17– processor 2 DDR3 DIMM 1F Slot
To remove a memory module:
1. Completely open the holding clips securing the module.
2. Gently pull the memory module upward to remove it from the slot.