HP ProLiant SL165z G6 Server Software Configuration Guide

Contents 21
Table 13 Console Redirection submenu fields
Field Descri
p
tion O
p
tions
Console Redirection Setting this value will allow configure the serial port. Enabled
Setting this value will prevent configure the serial port. This is
the default value.
Disabled
EMS support(SPCR) Enable EMS support. Include ACPI SPCR table pointer to
RSDT pointer list.
Disabled
Disable EMS support. Enabled
BIOS Serial Console
Baud Rate
Set the BIOS Serial Console Baud Rate as
“09600”,”19200”,”57600” or “115200”
Flow Control Disable Flow Control for Console Redirection None
Select Flow Control as Hardware Hardware
Select Flow Control as Software Software
Redirection After BIOS
POST
Redirection can be used after POST (Some OSs may not
work after set as always)
Always
Redirection can be used after POST Disabled
Terminal Type Set the terminal type as ANSI ANSI
Set the terminal type as VT100 VT100
Set the terminal type as VT-UTF8 VT-UTF8
USB Configuration submenu
Figure 19 USB Configuration submenu