HP ProLiant SL165z G6 Server Software Configuration Guide

Contents 17

Table 10 Serial Port Configuration submenu fields

Field Descri

tion O

tions

Serial Port Assignment This setting will assign the serial port connector to the system. This is

the default setting.

System

This setting will assign the serial port connector to the BMC

(Baseboard management controller).

BMC

Serial Port Switching This setting allows the Serial port switch between system and BMC.

This is the default setting

Enabled

This setting will prevent the Serial port from switching between

system and BMC.

Disabled

Serial Port Connection

Mode

Serial port connection mode is Direct. This is the default setting Direct

Serial port connection mode is Modem Modem

Figure 13 LAN Configuration submenu

Table 11 LAN Configuration submenu fields

Field Descri

tion O

tions

Share NIC Mode Setting this value will prevent support from share NIC mode Disabled

Setting this value will allow support share NIC mode.(Disabled the

KVM).

Enabled

DHCP IP Source Setting this value will allow dynamic IP assignment. Enabled

Setting this value will allow manual IP assignment. Disabled