HP ProLiant SL165z G6 Server Maintenance and Service Guide

Contents 55
Item
Designator
Description
10 P26, P27 Chassis ID 0/1
11 J21 Internal USB connector
12 P20 Password jumper
13 P10 18-pin front panel header
J36 3-pin front panel header
16 SATA SATA connectors
22 XU1 Processor 1 socket
23 J7,J8,J9,J10,J1
1,J12,J13,J14
Processor 1 DIMM slots
25 P24 8-pin power connector
26 P21 24-pin power connector
27 P23 8-pin power connector
28 XU2 Processor 2 socket
CAUTION: The TPM is not a customer-removable part.
Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security
rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider
the system compromised and take appropriate measures to ensure the integrity of the system data.
If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact
an HP authorized service provider for a replacement system board and TPM board.
Jumpers – Password and Chassis ID
System board password (P20) chassis ID1(P26) and chassis ID2(P27) jumpers
Table 3 describes the jumper settings
Table 3
System configuration switch settings
Jumper
Status
P20 1-2, password enable
P26 1-2, default setting
P27 2-3, default setting