HP ProLiant SL165s G7 Server Software Configuration Guide

System BIOS configuration 35
Table 23 POST error message
601 Error: BMC Not Responding
Please check Front panel, System ID Jumper or Riser card
Press F1 to Continue
628 Redundant Power Supply Mismatch
194 CPUID, Processor family are different
192
L3 cache size mismatch
197 Processor speeds mismatched
198 Processor QPI speed mismatch detected.
193
CPUID, Processor stepping are different
196 CPUID, Processor Model are different
195 Front side bus mismatch. System halted.
160 Processor missing microcode
005 CMOS Checksum Bad
041 Display memory test failed
040
Refresh timer test failed
048 Password check failed
00B CMOS Memory Size Wrong
010
Floppy Controller Failure
00C RAM R/W test failed
003 CMOS Battery Low
701
Insufficient Runtime space for MPS data.
System may operate in PIC or Non-MPS mode.
702 No enough APIC ID in range 0-0Fh can be assigned to IO APICs.
(Re-assigning CPUs' local APIC ID may solve this issue)
MPS Table is not built! System may operate in PIC or Non-MPS mode.
120 $A0CCMOS Cleared by Jumper. Restore the Jumper and Continue.
122
$A0CPassword Cleared By Jumper. Restore the Jumper and Continue.
POST-related troubleshooting
Refer to HP ProLiant SL165s Maintenance and Service Guide for troubleshooting guidelines.