HP ProLiant SL165s G7 Server Software Configuration Guide

System BIOS configuration 34
ensure that the server is properly functioning. This diagnostic function automatically runs each time the
server is powered on.
These diagnostics, which reside in the BIOS ROM, isolate server-related logic failures and indicate the
board or component that needs to be replaced, as indicated by the error messages. Most server
hardware failures are accurately isolated during POST. The number of tests displayed depends on the
configuration of the server.
POST error indicators
When POST detects a system failure, it will display a POST error message.
Recoverable POST Errors
Whenever a non-fatal error occurs during POST, an error message describing the problem appears
onscreen. These text messages are displayed in normal video (white text on black background). It
shows the details of the error.
In some cases an error message may include recommendations for troubleshooting or require that you
press the Enter key to display recommendations. Follow the instructions on the screen.
It is recommended that you correct the error before proceeding, even if the server appears to boot
successfully. If your system displays one of the messages marked below with an asterisk (*), write
down the code and message and contact your HP Customer Support provider.
When no POST error message is displayed but the server stops during POST, listen for beep codes.
Table 23 lists the most common POST error messages with their corresponding troubleshooting
recommendation.
Table 23
POST error message
601 Error: BMC Not Responding
605
BMC Has Detected Fatal Hardware Error
611 Internal User Area Of BMC FRU Corrupted
612 Controller Update 'boot block' Firmware Corrupted
613
Controller Operational Firmware Corrupted
620 Non-Redundant Fan Failure or Missing
621 Redundant Fan Configuration, One Fan Failure or Missing
622
Redundant Fan Configuration, Multiple Fans Failure or Missing
623 Temperature Violation Detected
Waiting 5 minutes for system to cool
Press ESC Key to resume booting without waiting for the system to cool
Warning: Pressing ESC is NOT recommended as the system may shutdown
unexpectedly
624 Power Supply Failure or Power Supply Unplugged
626 Update SDRR/Configuration Image failed
627 Invalid or Unknown SKU/Chassis ID