HP ProLiant SL160z G6 Server Software Configuration Guide

System BIOS configuration 18
Table 10 PCI Express Configuration submenu fields
Field Description Options
Active State Power-
Management
Enable PCI Express L0s and L1 link power states. Enabled
Disable PCI Express L0s and L1 link power states. Disabled
PCI Express Gen 2 Gen2: For best possible performance. Gen 2
Gen1: All PCI-E devices will only run in Gen 1 mode. Gen 1
IPMI Configuration submenu
Figure 12 IPMI Configuration submenu
Table 11 IPMI Configuration submenu fields
Field Description
Set LAN
Configuration
Select Set LAN Configuration in the left frame of the screen to go to the submenu for that
item. You can display a submenu about LAN options by highlighting it using the<Arrow>
keys. Set LAN Setup options are described in this section. The Set LAN BIOS Setup
screen is shown below (When you have a LO100 Device, this item will display).
SEL Configuration Select SEL Configuration in the left frame of the screen to go to the submenu for that item.
Then you can press Enter to enter its submenu. You can display a submenu about SEL
Configuration option by highlighting it using the <Arrow> keys.
Hardware health
information
Select Hardware Health Information in the left frame of the screen and press<enter> to
go to the submenu for that item. That will display CPU temperature, ambient temperature,
CPU fan speed, system fan speed, chassis fan speed. These items cannot be changed by
the user. It accords with the sense of the case. If there is LV CPU and no card in slot1,
then System Fan 6 Rotor 1 and System Fan 6 Rotor 2 no display.