HP ProLiant SL160z G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 47
Figure 30 Reinstalling the PCIe riser card X4
To install the PCIe X4 cage:
1. Align the riser card cage beside the PCIe X4 connecter on the main board
2. Install and tighten the two screws to secure the riser card cage to the chassis.
Figure 31 Reinstalling the PCIe Riser Card X4
To remove the PCIe card:
1. Remove the screw that secures the PCIe card.
2. Open the PCIe latch.
3. Pull the PCIe card back and away from the PCIe riser card.
4. Slide the PCIe bracket across the chassis.
5. Close the PCIe latch.