HP ProLiant SL160z G6 Server Maintenance and Service Guide

Removal and Replacement Procedures 29
Figure 1 Removing the top cover
To reinstall the top cover:
1. Align the top cover to the chassis and then slide it towards the front panel to position it into
place.
2. Fasten the two rear screws to secure the top cover to the chassis.
Figure 2 Reinstalling the top cover
Cable Management
Always follow good cable management practices when working inside the computer.
• Keep cables away from major heat sources like the heat sink.
• Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not
designed to withstand excessive pressure.
• Keep cables clear of sliding or moveable parts to prevent cutting or crimping.