ProLiant ML570 Generation 4 Server Maintenance and Service Guide
Specifications 94
Specification Value
Power supply output
Power supply output 910 W (low line)
1300 W (high line)
* 100 to 127 VAC is required for 8 A; 200 to 240 VAC is required for 4 A.
Hot-plug power supply calculations
For hot-plug power supply specifications and calculators to determine electrical and heat loading for the
server, refer to the HP Enterprise Configurator website (http://h30099.www3.hp.com/configurator/
).
DDR SDRAM DIMM specifications
NOTE: Use only 512-MB, 1-GB, 2-GB, or 4-GB; 72-bit wide; 2.5-V; PC2-3200 Registered
ECC DDR2 SDRAM. Use HP DDR2 SDRAM only.
Item Description
Size 512 MB, 1 GB, 2 GB, or 4 GB
Width 72 bits
Upgrade requirement Any combination of like-paired DDR SDRAM DIMMs that
provide a minimum of 1 GB
1.44-MB diskette drive specifications
Specification Value
Dimensions
Height 12.7 mm (0.5 in)
Width 96 mm (3.8 in)
Depth 130 mm (5.1 in)
LEDs (front panel) Green = On
Read/write capacity per
diskette
High density 1.44 MB
Low density 720 KB
Drives supported 1
Drive height One-third height
Drive rotation 300 rpm
Transfer rate
High 500 Kb/s
Low 250 Kb/s
Bytes/sector 512










