ProLiant ML570 Generation 4 Server Maintenance and Service Guide

Removal and replacement procedures 38
4.
Remove the power supply.
To replace the component, reverse the removal procedure.
Processor air baffle
To remove the component:
1. Power down the server (on page 28).
2. Do one of the following:
o Unlock and remove the bezel ("Tower bezel" on page 29).
o Extend the server from the rack (on page 28).
3. Remove the access panel. ("Access panel" on page 31)
4. Remove the processor air baffle.
To replace the component, reverse the removal procedure.