ProLiant ML570 Generation 3 Server User Guide

Server cabling 83
Standard SCSI cabling to an expansion board
NOTE: For some PCI slot locations, the SCSI cable routing may need to be altered. Placing cables either
over or under the mid-fan cage is acceptable.
NOTE: It may be necessary to slide the SCSI cable service loop from under the system board.
Standard SCSI cabling to a tape drive
NOTE: For some PCI slot locations, the tape drive cable routing may need to be altered. Placing cables
either over or under the mid-fan cage is acceptable.
Standard SCSI cabling to an external SCSI device
In order to connect an external device to the server:
1. Reconfigure the internal SCSI cabling (to SCSI Port 2).