HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
3-36 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
b. Using the following table, confirm that the LEDs reflect proper fan
operation.
Table 3-7: CPU and I/O Hot-Plug Fan LEDs
LED Status
Off Fan is not installed properly.
Green Fan is operational.
Amber Fan has failed.
4. Repeat steps 2 and 3 to install a second redundant fan.
5. Be sure that the internal health LED on the front panel LED assembly is
illuminated green, indicating that the system is functioning properly. For detailed
information on LEDs, refer to Appendix C, “System LEDs and Switches.”
6. If any of the LEDs indicates an error, refer to Appendix D, “Troubleshooting,” or
refer to the troubleshooting guide for instructions.
7. Reinstall the access panel.
8. Install the server. Refer to Chapter 5, “Installing the Rack Server” or Chapter 6,
Installing the Tower Server.”