HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
3-30 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
14. Lower the processor retaining bracket into position over the processor and
PPM (1) and secure it by tightening the thumbscrew (2).
CAUTION: Before closing the processor retaining bracket, be sure that the
processor locking lever is closed. Forcing the bracket shut may damage the
processor or the processor socket.
Figure 3-25: Securing the processor retaining bracket
15. Repeat steps 7 through 14 to upgrade the other processors, if installed.
16. If necessary, reinstall the memory board. For more detailed information about
installing a memory board, refer to the server memory installation guide on the
Documentation CD.