HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 3-25
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
6. Remove the front processor air baffle:
a. Loosen the two thumbscrews that secure the air baffle to the system tray (1).
b. Lift the air baffle up out of the server (2).
Figure 3-19: Removing the front processor air baffle
7. If necessary, remove the memory board in slot 2 to gain access to the processors.
For detailed information on removing a memory board, refer to the server
memory installation guide on the Documentation CD.