HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 3-19
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
11. Install the processor/heatsink assembly into the available processor socket:
a. Determine the correct processor orientation by observing the three guide pins
on the processor retaining bracket and the three corresponding guide holes on
the processor/heatsink assembly.
b. Insert the processor/heatsink assembly into the processor socket (1).
12. Close the processor locking lever (2).
IMPORTANT: If the processor locking lever is not secured, the processor retaining
bracket will not close properly.
Figure 3-13: Installing the processor/heatsink assembly
and securing the processor locking lever
NOTE: PPMs may look different than those illustrated in this document.