HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
3-14 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
Processors
This server support up to four Intel Xeon MP processors.
CAUTION: To be sure that the system ROM recognizes the new processor you are
installing, update the ROM if necessary. For the most recent ROMpaq, refer to the
website:
www.hp.com/servers/proliant/manage
Failure to flash your ROM before installing processors can cause system failure.
CAUTION: Processor socket 1 and PPM slot 1 must always be populated. Failure to
populate processor socket 1 and PPM slot 1 prevents the system from operating.
IMPORTANT: Install a PPM for each processor in the system. When installing a new
processor, you must also install a new PPM.
IMPORTANT: If processors of differing speeds are installed, each processor matches the
rated speed of the slower processor.
IMPORTANT: The servers ship with green-colored processor/heatsink assemblies. To be
sure that you install a processor compatible with the server, only install processors with
green-colored heatsinks.