HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Installing Hardware Options
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 3-3
HP CONFIDENTIAL
Writer: Wendy Wing File Name: d-ch3 Installing Hardware Options.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:51 AM
WARNING: To reduce the risk of personal injury or equipment damage, be
sure that:
• The leveling jacks are extended to the floor.
• The full weight of the rack rests on the leveling jacks.
• The stabilizers are attached to the rack for single-rack installation.
• The racks are coupled in multiple-rack installations.
WARNING: To reduce the risk of personal injury from hazardous energy or of
damage to the equipment when working on energized servers with
precautions:
• Remove all watches, rings, and any other loose fitting jewelry.
• Avoid the use of conductive tools inside the server that could bridge live
parts.
CAUTION: For Compaq branded Series 7000 racks, you must install
highly ventilated rack door inserts to provide proper front-to-back airflow and cooling.
CAUTION: Be sure that your rack meets all recommended space and airflow
requirements for the server.
HP has equipped the server chassis with a system tray to facilitate the installation of
hardware upgrades, particularly accessing the drive fans and internal cabling. Most
hardware options are installed onto the system board, the memory board, or in the
drive bay.
To streamline the installation process, read the installation instructions for all of the
hardware options and identify similar steps before installing the hardware options.