HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

System LEDs and Switches
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide C-7
HP CONFIDENTIAL
Writer: Wendy Wing File Name: l-appc System LEDs and Switches.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:22 AM
Use the following table to identify PCI-X Hot Plug slot activity status according to
LED description.
Table C-5: PCI-X Expansion Slot LEDs
LED State OK to
Open
Slot Status
Power
Fault
On
Off
No Power is currently applied to the slot. Do NOT
open the expansion slot latch. The slot is
functioning normally.
Power
Fault
On
On
No Power is currently applied to this slot, but the
slot needs ATTENTION for a possible problem
with the slot, expansion board, or driver. Do
NOT open the expansion slot latch.
Power
Fault
Flashing
On or Off
No The power slot is being turned off or on, which
may take several minutes. Do NOT open the
expansion slot latch. Press the PCI-X Hot Plug
button to cancel the operation.
Power
Fault
Off
On
Yes Power to this slot is turned off, but this slot
needs ATTENTION. There may be a problem
with the slot, expansion board, or driver.
Power
Fault
Off
Off
Yes The power to the slot is off. An expansion
board may be installed in this slot.
Note: If the any of the LEDs indicates an error, refer to Appendix D, “Troubleshooting,” for
more information.