HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Server Features
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 1-7
HP CONFIDENTIAL
Writer: Wendy Wing File Name: b-ch1 Server Features.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 10:28 AM
• Internal-to-external SCSI cable assembly
The server ships with an internal-to-external SCSI connector and cable. The
cable can be connected to one of the SCSI connectors on the system board,
enabling you to connect external SCSI devices through the VHDCI SCSI
connector on the rear panel of the server.
System Monitoring
The server’s system is monitored by internal and external LEDs, including:
• Component LEDs visible on the front of the server
— Power On/Standby button and LED
— Internal health
— External health
— Embedded NIC activity
— Hard drives
— UID (Unit Identification) LED and button
• Component LEDs visible on the rear of the server
— Power supplies
— Embedded NIC activity
— Hot-plug expansion slots (power and fault status)
— UID (Unit Identification) LED and button
• Component LEDs visible inside the server
— Processors
— Processor Power Modules (PPMs)
— Memory board
— Expansion slots (speed, power, and fault status)
— Fans
— Memory board interlock