HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Regulatory Compliance Notices
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide A-7
HP CONFIDENTIAL
Writer: Wendy Wing File Name: j-appa Regulatory Compliance Notices.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:19 AM
Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety standards
including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the HP supplied laser
device.
This label indicates that the
product is classified as a CLASS
1 LASER PRODUCT. This label
appears on a laser device
installed in your product.
Laser Information
Laser Type Semiconductor GaAIAs
Wave Length 780 nm +/- 35 nm
Divergence Angle 53.5 degrees +/- 0.5 degrees
Output Power Less than 0.2 mW or 10,869 W·m-2 sr-1
Polarization Circular 0.25
Numerical Aperture 0.45 inches +/- 0.04 inches
Battery Replacement Notice
The server is provided with an internal lithium battery. There is a danger of explosion
and risk of personal injury if the battery is incorrectly replaced or mistreated. Follow
battery installation procedures carefully and adhere to all warnings and cautions
associated with the installation.