HP ProLiant ML570 Generation 2 Server Setup and Installation Guide

Server Configuration and Utilities
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide 8-11
HP CONFIDENTIAL
Writer: Wendy Wing File Name: i-ch8 Server Configuration and Utilities.doc
Codename: Time Bandit Part Number: 223960-002 Last Saved On: 8/22/02 11:17 AM
Configuring Advanced Memory Protection
To configure advanced memory protection:
1. Access RBSU by pressing the F9 key during power up when the prompt displays
in the lower right corner of the screen.
2. Select System Options.
3. Select Advanced Memory Protection.
4. Select the desired memory mode.
5. Press the Enter key.
6. Press the Esc key to exit the current menu, or press the Esc key, and then press
the F10 key at the prompt to exit RBSU.
IMPORTANT: To reconfigure the memory after initial setup, you must reboot the system.
Saving RBSU Configuration Settings for Multiple Server
Replication
To save RBSU configuration settings, use the Configuration Replication Utility from
the SmartStart Scripting Toolkit. Saving the configuration enables you to restore
settings at a later date. Use the Configuration Replication Utility from the
SmartStart CD or download the Scripting Toolkit from the website:
www.hp.com/servers/sstoolkit
Redundant ROM Support
The server enables you to upgrade or configure your ROM safely with redundant
ROM support. The server has a ROM image that acts as two separate 1-MB ROMs.
In the standard implementation, one section of the ROM contains the most current
ROM version, while the other section of the ROM contains a previous version.
When the server boots, the system identifies whether the current ROM bank is
corrupt. If a corrupt ROM is detected, the system boots from the backup ROM and
alerts you through POST or IML that the ROM bank is corrupt.